Ultrasonic Transducer,Ultrasonic Generator,Ultrasonic Cleaner -SKSONIC
In the use of ultrasonic transducers that require high power to remove dirt without considering external damage to the workpiece, a lower cleaning frequency in the range of 20kHz to 30kHz is usually chosen. The cleaning frequency in this frequency range is often used to clean large, heavy parts or high-density data workpieces. High frequency is usually used to clean smaller and finer parts, or to eliminate large particles. High frequency is also used for applications where damage to the surface of the workpiece is not allowed. The use of high-frequency can improve the cleaning function in several ways.
| Type | Length（mm） | Weight（g） | Frequency（KHz） | Resonance Impedance （Ω） |
Static Capacity （pF）±10% |
Input Power（W） |
| PU-UT-20100 PZT-8 |
94 | 900 | 20 | 10-20 | 5200 | 100 |
| PU-UT-25100 PZT-4 |
77 | 710 | 25 | 10-20 | 6600 | 100 |
| PU-UT-28120 PZT-4 |
66 | 720 | 28 | 10-20 | 7800 | 120 |
| PU-UT-28100 PZT-8 |
66 | 625 | 28 | 10-20 | 5200 | 100 |
| PU-UT-28100 PZT-4 |
66 | 624 | 28 | 10-20 | 6600 | 100 |
| PU-UT-30100 PZT-8 |
61 | 555 | 30 | 10-20 | 5200 | 100 |
| PU-UT-2560 PZT-4 |
77 | 530 | 25 | 10-20 | 5400 | 60 |
| PU-UT-2860 PZT-8 |
68 | 470 | 28 | 10-20 | 3800 | 60 |
| PU-UT-2850 PZT-4 |
82 | 425 | 28 | 10-20 | 4100 | 50 |
| PU-UT-3360 PZT-8 |
58 | 420 | 33 | 10-20 | 3800 | 60 |
| PU-UT-4060 PZT-8 |
55 | 300 | 40 | 10-20 | 3800 | 60 |
| PU-UT-4060 PZT-4 |
56 | 310 | 40 | 10-20 | 5400 | 60 |
| PU-UT-4050 PZT-4 |
54 | 260 | 40 | 10-20 | 4100 | 50 |
| PU-UT-4050-1 PZT-4 |
57 | 300 | 40 | 10-20 | 4100 | 50 |
| PU-UT-5435 PZT-4 |
36 | 135 | 54 | 10-20 | 3200 | 35 |
| PU-UT-6860 PZT-8 |
80 | 460 | 68 | 10-20 | 3800 | 60 |
| PU-UT-68120 PZT-4 |
67 | 588 | 68 | 10-20 | 7800 | 120 |
| PU-UT-8060 PZT-4 |
60 | 325 | 80 | 10-20 | 5400 | 60 |
| PU-UT-12060 PZT-4 |
56 | 260 | 120 | 10-20 | 5400 | 60 |
| PU-UT-13550 PZT-4 |
54 | 215 | 135 | 10-20 | 4200 | 50 |
