Ultrasonic Transducer,Ultrasonic Generator,Ultrasonic Cleaner -SKSONIC
In the use of ultrasonic transducers that require high power to remove dirt without having to think about the surface damage of the work piece, a lower cleaning frequency in the range 20 kHz to 30 kHz is often chosen. Cleaning frequencies in this range are often used to clean large, heavy parts or work pieces with high density data. High frequencies are often used to clean smaller, finer parts, or to purge large particles. High frequencies are also used for use where damage to the surface of the work piece is not allowed. The use of high frequency can improve the cleaning function in several ways.
| Type | Length（mm） | Weight（g） | Frequency（KHz） | Resonance Impedance （Ω） |
Static Capacity （pF）±10% |
Input Power（W） |
| PU-UT-20100 PZT-8 |
94 | 900 | 20 | 10-20 | 5200 | 100 |
| PU-UT-25100 PZT-4 |
77 | 710 | 25 | 10-20 | 6600 | 100 |
| PU-UT-28120 PZT-4 |
66 | 720 | 28 | 10-20 | 7800 | 120 |
| PU-UT-28100 PZT-8 |
66 | 625 | 28 | 10-20 | 5200 | 100 |
| PU-UT-28100 PZT-4 |
66 | 624 | 28 | 10-20 | 6600 | 100 |
| PU-UT-30100 PZT-8 |
61 | 555 | 30 | 10-20 | 5200 | 100 |
| PU-UT-2560 PZT-4 |
77 | 530 | 25 | 10-20 | 5400 | 60 |
| PU-UT-2860 PZT-8 |
68 | 470 | 28 | 10-20 | 3800 | 60 |
| PU-UT-2850 PZT-4 |
82 | 425 | 28 | 10-20 | 4100 | 50 |
| PU-UT-3360 PZT-8 |
58 | 420 | 33 | 10-20 | 3800 | 60 |
| PU-UT-4060 PZT-8 |
55 | 300 | 40 | 10-20 | 3800 | 60 |
| PU-UT-4060 PZT-4 |
56 | 310 | 40 | 10-20 | 5400 | 60 |
| PU-UT-4050 PZT-4 |
54 | 260 | 40 | 10-20 | 4100 | 50 |
| PU-UT-4050-1 PZT-4 |
57 | 300 | 40 | 10-20 | 4100 | 50 |
| PU-UT-5435 PZT-4 |
36 | 135 | 54 | 10-20 | 3200 | 35 |
| PU-UT-6860 PZT-8 |
80 | 460 | 68 | 10-20 | 3800 | 60 |
| PU-UT-68120 PZT-4 |
67 | 588 | 68 | 10-20 | 7800 | 120 |
| PU-UT-8060 PZT-4 |
60 | 325 | 80 | 10-20 | 5400 | 60 |
| PU-UT-12060 PZT-4 |
56 | 260 | 120 | 10-20 | 5400 | 60 |
| PU-UT-13550 PZT-4 |
54 | 215 | 135 | 10-20 | 4200 | 50 |
