40khz 6L Bath Tank Cleaning Machine With Digital Timer And Heater Professional Ultrasonic Cleaner

Ultrasonic cleaning machine cleaning process flow:

1. Add tap water to the cleaning tank, ensuring that the water level is higher than or equal to 3/4 of the height of the tank. Start electric heating and also start ultrasonic for degassing. When the water temperature is around 40 degrees Celsius, add the specified amount of ultrasonic special cleaning agent. When the water temperature reaches 55-60 degrees Celsius, start cleaning the parts.

2. Disassemble the parts that need to be cleaned as much as possible, and use high-pressure water guns, wire brushes, shovels, or other tools to manually assist in pre-treatment of the soil, heavy oil stains, and heavy carbon deposits on the surface of the parts to ensure the service life of the cleaning solution and the speed and effectiveness of cleaning.

3. Place the parts that need to be cleaned into the cleaning pool, without overlapping, to ensure that the parts are submerged by the cleaning solution.

4. Start the ultrasonic wave and clean it regularly for 20-30 minutes. After cleaning, turn off the ultrasonic wave and remove the components for post-processing.

5. Use a high-pressure water gun to remove the residue on the surface of the components, and use an air compression gun to remove the residue in the pores. Parts that require rust prevention will be treated separately. To improve the cleaning effect, if time permits,

The cleaning time of components in the cleaning solution can be appropriately extended. In actual operation, in order to improve cleaning efficiency, a process flow of disassembly and cleaning can be adopted.