De bästa leverantörerna av ultraljudsutrustning

+86-0755-33558265 admin@pulisonic.com |

Ultraljudssvetsmaskin av plast/

SD Card U Disk Communication Products Earphone Plastic Welder Ultrasonic Plastic Welder Machine

  • Överblick
Skicka förfrågan

IMG 20211014 151815 - SD Card U Disk Communication Products Earphone Plastic Welder Ultrasonic Plastic Welder MachineThe welding surface of the plastic ultrasonic welding machine equipment surrounding the connection interface must be unified and closely connected with each other. If possible, the contact surface should be on the same plane as much as possible, so as to maintain consistency during energy conversion. Close range welding refers to the welding position being within 6mm from the contact position of the welding head, while long-distance welding is greater than 6mm. The energy in ultrasonic welding is attenuated during the transmission of plastic parts. Attenuation is also severe in low hard bottom plastics, so special attention should be paid to allowing sufficient energy to be transmitted to the processing area during design. Long distance welding is suitable for hard adhesives such as PS, ABS, AS, PMMA, etc. Some semi crystalline plastics (such as POM, PETP, PBTB, PA) can also be used for long-distance welding through appropriate shape design.

Type Power(W) Frequency (Khz)
PU-JGM1000W 1000W 15KHZ/20KHZ/40KHZ
PU-JGM2000W 2000W 15KHZ/20KHZ
PU-JGM3000W 3000W 15KHZ
PU-JGM4200W 4200W 15KHZ

SD Card U Disk Communication Products Earphone Plastic Welder Ultrasonic Plastic Welder Machine

Föregående:

Nästa:

Lämna svar

Få en offert ?