The high-power stainless steel ultrasonic vibration plate is made of stainless steel, with the most commonly used being 304 stainless steel. However, 304 stainless steel is not resistant to acid and alkali, and can only be cleaned with clean water or ordinary cleaning agents. If there is acid or alkali in the cleaning solution, it must be made of 316 liters of stainless steel. The thicker the stainless steel vibration plate or cleaning machine, the better, nor the thinner the better. A thickness of 2.0mm is relatively economical and has good ultrasonic effects. Even if the low frequency is lower than 25KHZ, high cost and high frequency ultrasonic vibrators use 3.0mm thick stainless steel.
Ituaiga | Diamention(mm) | Frequency(Khz) | Mana(W) | Ultrasonic Transducer |
PU-UITP300W | 300*190*100 | 25,28,33,40,80,130 | 300 | 6 |
PU-UITP600W | 360*275*100 | 25,28,33,40,80,130 | 600 | 12 |
PU-UITP1000W | 450*350*100 | 25,28,33,40,80,130 | 1000 | 20 |
PU-UITP1200W | 470*380*100 | 25,28,33,40,80,130 | 1200 | 24 |
PU-UITP1500W | 520*450*100 | 25,28,33,40,80,130 | 1500 | 30 |
PU-UITP1800W | 560*450*100 | 25,28,33,40,80,130 | 1800 | 36 |
PU-UITP2000W | 650*450*100 | 25,28,33,40,80,130 | 2000 | 40 |
PU-UITP2400W | 740*520*100 | 25,28,33,40,80,130 | 2400 | 48 |
PU-UITP3000W | 820*540*100 | 25,28,33,40,80,130 | 3000 | 60 |
PU-UITP5000W | 1200*590*100 | 25,28,33,40,80,130 | 5000 | 100 |
OEM Ultrasonic Immersible Transducer Pack(Telē, Frequency,Mana) |