The ultrasonic power supply in the form of “frequency tracking” appears to work normally on the surface, but due to the fact that the cleaning transducer is composed of multiple single transducers bonded together, some parameters of the transducer will undergo significant changes (considering the mechanical coupling coefficient). In actual tracking, only a portion of the characteristics and tracking algorithm requirements of a single transducer that are close to each other can work well, Similarly, due to the small range scanning back and forth at this selected working point, a single transducer in this section carries a large amount of power, while some parameters deviate from the working point and the output power of the transducer is relatively small. In order to achieve a certain cleaning effect, it is necessary to adjust the power supply to output a relatively large amount of power, which causes some transducers to generate abnormal heat and the vibration surface steel plate of the transducer to quickly cavitate and corrode.
|
Type |
Power（W） |
Frequency (KHz) |
Transducer numbers |
Size |
|
AC110V60HZ+/-10% USA /LATIN AMERICA STANDARD ARE AVAILABLE |
||||
|
PU-GT300 |
300W |
20khz,25khz,28khz,33khz,40khz |
3-6 |
300x360x150 |
|
PU-GT600 |
600W |
20khz,25khz,28khz,33khz,40khz |
6-12 |
300x360x150 |
|
PU-GT900 |
900W |
20khz,25khz,28khz,33khz,40khz |
9-18 |
300x360x150 |
|
PU-GT1000 |
1000W |
20khz,25khz,28khz,33khz,40khz |
10-20 |
300x360x150 |
|
PU-GT1200 |
1200W |
20khz,25khz,28khz,33khz,40khz |
12-24 |
300x360x150 |
|
PU-GT1500 |
1500W |
20khz,25khz,28khz,33khz,40khz |
15-30 |
300x360x150 |
|
PU-GT1800 |
1800W |
20khz,25khz,28khz,33khz,40khz |
18-36 |
300x360x150 |
|
PU-GT2000 |
2000W |
20khz,25khz,28khz,33khz,40khz |
20-40 |
300x360x150 |
|
PU-GT2400 |
2400W |
20khz,25khz,28khz,33khz,40khz |
24-48 |
300x360x150 |
|
PU-GT3000 |
3000W |
20khz,25khz,28khz,33khz,40khz |
50-60 |
300x360x150 |
|
High Frequency |
300W-1200W |
65-80khz |
||
|
High Frequency |
300W-1200W |
120-135khz |
||
