De bedste leverandører af ultralydsudstyr

+86-0755-33558265 admin@pulisonic.com |

Ultralydimpedans analysator/

500kHz 1MHZ 3MHZ Graphic Transducer Pizeoceramic Tester Ultrasonic Frequency Impedance Analyzer

  • Overview
Send Inquiry

40 - 500kHz 1MHZ 3MHZ Graphic Transducer Pizeoceramic Tester Ultrasonic Frequency Impedance AnalyzerImpedance analyzers can measure and evaluate to match the circuit

For piezoelectric ceramic sheets, the quality of the device can be directly judged from the admittance circle diagram and logarithmic coordinates. If there are layers or cracks inside the ceramic sheet, the logarithmic curve will have multiple peaks, and multiple parasitic small circles will appear on the admittance circle diagram

Whether the design, processing, and assembly of the horn are reasonable or have defects can be clearly seen on the guide circle diagram

For the production and processing of ultrasonic welding machines, the results of the admittance circle are used to analyze the status of the welding machine. Through the analysis of parameters and graphics, problems with the welding machine are identified

For the production and processing of ultrasonic cleaning machines: The selection of vibrators requires their vibration performance to be as consistent as possible (bandwidth, quality factor, resonance frequency, dynamic impedance). On the admittance circle diagram, there should be no parasitic circles as much as possible or near the resonance point. It can be used for the manufacturing, incoming material inspection, and bonding of transducers The impedance characteristics of the cleaning machine can be analyzed and measured. The resonance frequency and static capacitance of the machine can be calibrated to match the power supply. The characteristics of its new resonance point, impedance after water injection, capacitance, and vibration mode of the entire machine can be analyzed

Product name Sound intensity measuring instrument Numbering
Model PLS-SYJ100 Date of inspection
Testing base Enterprise production specification Detection parameter The test sound intensity is 0.8W/cm², which meets the factory requirements
Test equipment parameters Frequency: KHz, Power: KW.
Test items Sound intensity meter parameter measurement Conclusion Compliance with the factory-leaving standard of enterprises

500kHz 1MHZ 3MHZ Graphic Transducer Pizeoceramic Tester Ultrasonic Frequency Impedance Analyzer

Prev:

Next:

Leave a Reply

Få et tilbud ?