Els millors proveïdors d'equips ultrasònics

+86-0755-33558265 admin@pulisonic.com |

Analitzador d'impedància ultrasònica/

1khz -5mhz Ultrasonic Impedance Analyzer For Testing Piezoceramic And Ultrasonic Transducer Parameters

  • Overview
Send Inquiry

28 - 1khz -5mhz Ultrasonic Impedance Analyzer For Testing Piezoceramic And Ultrasonic Transducer ParametersImpedance analyzer can measure and evaluate the matching with the circuit. For piezoelectric ceramic chips, the quality of the device can be directly judged from the admittance circle diagram and logarithmic coordinates. If there are layers or cracks inside the ceramic chip, the logarithmic curve will have multiple peaks, and multiple parasitic small circles will appear on the admittance circle diagram. For the design, processing, and assembly of the amplitude converter, whether it is reasonable or defective, It can be clearly seen directly on the guide circle diagram. For the production and processing of ultrasonic welding machines, the results of the admittance circle are used to analyze the state of the welding machine. Through parameter and graphic analysis, problems with the welding machine are identified. For the production and processing of ultrasonic cleaning machines, the selection of vibrators requires their vibration performance to be as consistent as possible (bandwidth, quality factor, resonance frequency, dynamic impedance). On the admittance circle diagram, There should be no parasitic circles as much as possible or near the resonance point. Impedance characteristics analysis and measurement can be conducted on the manufacturing of the transducer, incoming material inspection, bonded transducer, and cleaning machine. For the measurement of the entire cleaning machine, the resonance frequency and static capacitance of the machine can be calibrated to match the power supply. The characteristics of its new resonance point, impedance after water injection, capacitance, and vibration mode of the entire machine can be analyzed

Product name Sound intensity measuring instrument Numbering
Model PLS-SYJ100 Date of inspection
Testing base Enterprise production specification Detection parameter The test sound intensity is 0.8W/cm², which meets the factory requirements
Test equipment parameters Frequency: KHz, Power: KW.
Test items Sound intensity meter parameter measurement Conclusion Compliance with the factory-leaving standard of enterprises

1khz -5mhz Ultrasonic Impedance Analyzer For Testing Piezoceramic And Ultrasonic Transducer Parameters

Prev:

Next:

Leave a Reply

Obteniu un pressupost ?