1500W 25KHZ Ultrasonic Vibration Power Generator Ultrasonic Generator For Turbocharger Car Engine Ultrasonic Cleaner

Adjust the power of the ultrasonic cleaning generator according to the characteristics and requirements of the cleaning object. Generally speaking, the higher the power, the better the cleaning effect, but it is also important to avoid damage to the equipment caused by excessive power. During the debugging process, the size and quantity of bubbles generated by the cleaning solution in the cleaning tank can be observed to determine the magnitude of ultrasonic power. Cleaning time debugging. Set an appropriate cleaning time based on the degree of dirt and cleaning requirements of the cleaning object. Generally speaking, the longer the cleaning time, the better the cleaning effect, but it is also important to avoid wasting equipment due to prolonged cleaning time. During the debugging process, it is possible to determine whether the cleaning time is appropriate by observing whether the surface of the cleaned components is clean and free of residue. Cleaning effect test. After debugging is completed, a cleaning effect test should be conducted. Put the parts to be cleaned into the cleaning tank and start the equipment for cleaning. After cleaning, remove the components for inspection and observe if their surfaces are clean and free of residue. At the same time, the cleaned wastewater can also be tested to understand the types and concentrations of pollutants generated during the cleaning process.