Ultraheli andur,Ultraheli generaator,Ultraheli puhastaja -SKSONIC
The high-power ultrasonic pulse generator uses four high-power IGBT devices and their corresponding absorbing freewheeling components to form a half bridge inverter main circuit. The output circuit transmits this oscillating electrical energy to the transducer array through an output transformer and converts it into mechanical energy that acts on the load. The protection system consists of overcurrent protection and overheating protection. When the power load is short circuited and generates overcurrent or overheats due to poor heat dissipation conditions, it can suppress the output and ensure the safety of the power circuit.
|
Liik |
Võimsus（W） |
Sagedus (Khz) |
Anduri numbrid |
Suurus |
|
AC110V60HZ+/-10% USA / LADINA-AMEERIKA STANDARD ON SAADAVAL |
||||
|
PU-GT300 |
300W |
20Khz,25Khz,28Khz,33Khz,40Khz |
3-6 |
300x360x150 |
|
PU-GT600 |
600W |
20Khz,25Khz,28Khz,33Khz,40Khz |
6-12 |
300x360x150 |
|
PU-GT900 |
900W |
20Khz,25Khz,28Khz,33Khz,40Khz |
9-18 |
300x360x150 |
|
PU-GT1000 |
1000W |
20Khz,25Khz,28Khz,33Khz,40Khz |
10-20 |
300x360x150 |
|
PU-GT1200 |
1200W |
20Khz,25Khz,28Khz,33Khz,40Khz |
12-24 |
300x360x150 |
|
PU-GT1500 |
1500W |
20Khz,25Khz,28Khz,33Khz,40Khz |
15-30 |
300x360x150 |
|
PU-GT1800 |
1800W |
20Khz,25Khz,28Khz,33Khz,40Khz |
18-36 |
300x360x150 |
|
PU-GT2000 |
2000W |
20Khz,25Khz,28Khz,33Khz,40Khz |
20-40 |
300x360x150 |
|
PU-GT2400 |
2400W |
20Khz,25Khz,28Khz,33Khz,40Khz |
24-48 |
300x360x150 |
|
PU-GT3000 |
3000W |
20Khz,25Khz,28Khz,33Khz,40Khz |
50-60 |
300x360x150 |
|
Kõrge sagedus |
300W-1200W |
65-80Khz |
||
|
Kõrge sagedus |
300W-1200W |
120-135Khz |
||
