Innovation is based on new thinking, new inventions and new description of the characteristics of a process of conceptualization.
ultrasonic washing machineOptical glass ultrasonic cleaning after polishing

ultrasonic cleaner tank 316L Stainless steel

Ultrasonic cleaner tank is the body part split and control the slot machine, with high, clean, easy to use, appearance, durability and easy maintenance characteristics, production processes meet the country's green production requirements, with alkaline or acidic water-based solvents (PH ≤ 6.3) as a cleaning agent for watch parts, hardware machinery parts, jewelry, lenses, spectacle frames and glassware cleaning.
ultrasonic-cleaner-tank

Type

Internal size
L*W*H (mm)

Outsize mm
L*W*H (mm)

Frequency (Khz)

Power(W)

SK-1018ST

490×360×320

610×480×675

28khz,33khz,40khz

900W

SK-1024ST

630×430×320

740×550×675

28khz,33khz,40khz

1200W

SK-1030ST

630×530×320

750×650×675

28khz,33khz,40khz

1500W

SK-1036ST

680×530×360

800×650×700

28khz,33khz,40khz

1800W

1.1 Preparation before start
1.1.1 Check whether the washing machine properly installed smoothly, chassis ground is reliable.
1.1.2, the electrical control panel all the switch to the "off" position, check the power supply meets the requirements, the power indicator light.
1.1.3 Turn off the side of the washing machine drain valve
1.1.4, inject cleaning fluid, cleaning items to be completely immersed in the cleaning solution, the liquid from the cleaning tank top about 80mm.
1.2, operating instructions
1.2.1, start the power switch on the ultrasonic generator, according to the cleaning process requirements, the various functional twist knob to the desired process parameters.
1.2.2, please be washed workpiece into the cleaning tank, ultrasonic cleaning begins. When you reach the desired cleaning time, remove the cleaned workpiece, and then placed under a workpiece to be washed clean.
Note: Do not put directly into the workpiece cleaning tank for cleaning to prevent damage to the ultrasonic transducer.
1.2.3, washing machine stopped working before switching off the ultrasound, and then cut off the power.
2, Notice (special attention to 1,2 points)
2.1, no cleaning tank cleaning fluid, absolutely not start ultrasound, otherwise it will cause damage to the transducer serious consequences.
2.2, shall not be the object directly into the cleaning tank, if any, should be promptly removed foreign bodies falling into the bottom of the tank, otherwise it will damage the ultrasonic generator.
2.3, do not spill liquids on the transducer and ultrasonic generator.
2.4, cleaning tank sediment is excessive, should be promptly put liquid rinse cleared.


Original articles such as reserved:SK ultraonic cleaner Blog
This link address:http://www.sksonic.com/ultrasonic/ultrasonic-cleaner-tank-316L-Stainless-steel.html

Powered By SK ultrasonic cleaner

Copyright SK ultrasonic Your WebSite. Some Rights Reserved.